This is a good way of saving space on the network drives andit makes SCCM guy life easy. When you get a new model identify required driversand import then into appropriate category then update the driver package. Inthis method, we are adding different set of drivers to one driver package. Whena machine reaches Apply driver packagestep it scans all available drivers and apply appropriate drivers. If you have1 or 2 models this method is good as there are not many drivers to scan in thepackage. But if you have 10-15 models the drivers package will grow as big as 5-6 GB. When we build a machine using this driver package, the applying driverstage will take quite some time to finish and the build time will significantlyincrease.
In some cases the simple Windows 7 build took more than 3 hours tofinish.
Part 9 discusses the role of drivers in the Config Mgr 2012 OSD process.Config Mgr is hardware agnostic to a degree. We will capture an image from a reference computer in Part 10 and it will not matter which make and model of hardware we use. Drivers are injected into the process as required.Network Card drivers: The deployment process relies heavily on the use of Windows PE. Config Mgr utilises boot images to allow devices to boot into PE. However in order to allow this for your particular makes and models you must first add your network card drivers to the boot images.
The process is shown below.Driver Packages: We will create a driver package for each of our makes and models. Each package will contain the full driver set for that model. When we create our OSD task sequence in Part 11 we will incorporate the driver packages. We will configure a series of WMI queries so that only the correct driver package is applied during a deployment.Most hardware vendors create cab files for their models. These cab files contain the full driver set and can be downloaded from their web sites. This makes it easy to add the drivers to your driver package in one operation. Otherwise you have to download and add individual drivers as required.First prepare your Windows and Config Mgr folder structures.
Thank you so much for this guide. I'm following all of the chapters on OSD. I really appreciate it.A few quick questions.Any reason why you made the Driver Package after you imported them? I saw that we could do it while importing?It seems like you initially updated the boot image with the drivers, but then later you write not to. What did I miss other than the architecture?Lastly, I followed that you recommend creating the folder structure both inside the console and out, but other than the NIC folder, I don't see how we use the CAB folder.Thanks so much!
Hi Gerry,First time poster!So far I have managed to get this far, however I am experiencing a little issue when importing the drivers. I have a shared folder for the driver source on the server with permissions for everyone (full) my SMSAdmin (Full) snd Domain Admins (Full), however when I input the full UNC I get the following error'Configuration Manager cannot import the specified driver folder. Verify that the folder exists in the specified location and that both the SMS Provider computer and the computer running the Configuration Manager console have read permissions to the specified shared folder.Like I have said I have checked permissions but to no avail.Any Ideas?ThanksJohn. Hi Gerry,Sorry I just typed my question but it seems to have disappeared so here goes again:First thanks for the posts they are very helpful.Second, I see you mentioned that there are a few reasons why there would be no boot images?
Would you be able to elaborate a bit as I have just got to the 'WDS part' of my SCCM primary server setup and find that there are no boot images. I have already done a LOT of other config on this primary so am hoping that there is a fix for my issue. (Just finished the WSUS automatic deployment of patches and have the machines compliant on the network)Thanks,Chris.
AnonymousHi Gerry - I'm experimenting on a Lenovo E430 laptop, trying to push down Windows 7 x86. So I'm going through this blog (and a few others) trying to set up OSD. I have found NIC drivers for it over at Lenovo site, but I don't see any 'CAB' download for this model. I assume by CAB you mean a bundle of all drivers for this particular peice of hardware, correct? I just see individual feature/chip downloads on the Lenovo site. How does one go about finding these bundled CAB drivers - are they always available? What if they aren't?Thanks.
Jim HumeGerry - couple of questions. In your first step 'First prepare your Windows and Config Mgr folder structures' - you created a global NIC folder - do you place both x86 and x64 in here? Then run two imports pulling from this folder, deselecting/selecting the appropriate architecture when importing to the boot images? I suspect this is what you do (in the example, you only did x64).Some PCs have multiple NIC drivers per model - does SCCM intelligently detect the appropriate driver needed when running WinPE and capturing an image? How reliable is this auto detection, if so?
Over time, as I add additional drivers and re-create the.iso, I want to make sure this single iso will work for multiple hardware sets.Thank you for your great posts. I'll answer all these questions together. The CAB folder contains the zipped files downloaded from the vendor website.
Even after you import the drivers you will require the source files to remain in their original location. This will be required in case you have to change something. The process will fail if ConfigMgr cannot find the original source files.I always import CAB file drivers and add them to a package straight away. See my answer to Jim above regarding auto-apply drivers Vs driver packages.There are many ways of working with drivers in ConfigMgr. You need to find the way that works for you. AnonymousGerry, please can you help me?
I try capture my image but display error network adapter not found. I press F8 open ipconfig and any data display for me. So, I found the driver in site manufacturer and by drvload I put this driver manually and OK, driver for Windows 8 (although my image capture is Win7). So I inject this driver in my image boot but I don't have sucess, I'm using SCCM 2012 SP1 with WINPE 4.0.Please any idea I'll appreciate.I have this topci in technet: a bunch Gerry.
RichHi Gerry,We have a few HP models from the same line which unfortunately use the same hardware but slightly different revisions. When all the drivers have been imported, only the latest driver revision is stored, meaning older models have issues during build.
I recently came across a blog which suggested creating a package (without application) which points to the server location of the drivers, and in the task sequence, creating a run command step which runs 'DISM.exe /Image:%OSDisk% /Add-Driver /Driver. Drake ft trey songz replacement girl download mp3. /Recurse' and references the package containing the location to the drivers.
This has proved 100% successful so far - note we are only deploying windows 7 and above so no need for unsigned support or the ability to specify mass storage drivers. Interested in what you think of this approach vs the norm of importing, and creating separate driver packages. Steve MartensHey Gerry, great guide, one of the best for sure. I ran into a problem that I believe may be useful to others.I added NIC drivers to my boot images, updated the boot images on the distribution point, and when the machine boots in WinPE, it still does not get an IP address. No errors, just fails after Preparing Network Connections. F8 and ipconfig show no info.
I have confirmed that I have the correct driver. So off to Google I go and I come up with this:followed this guide and it solved my problem.Another very helpful resource:http://www.adamfowlerit.com/2013/10/08/troubleshooting-nic-drivers-in-winpe-for-sccm-2012/Cheers!
AnonymousHello Gerry,Yesterday I ran into the issue of importing some NIC drivers in and when I get to the add drivers to boot image I am left with no options to pick my X64 or X86 boot image. I have tried to delete the drivers and import them back in but still left with a blank box. I have followed step by step of adding the NIC's and even tried to do an edit of the boot image on the driver but still come up empty. Some forums of have stated that you can click on the boot image and add the drivers on the driver tab but I do not have that tab.
Create Driver Packages Sccm 2012
I have search around and cannot find anything to help me out any suggestions? I am on SCCM 2012 R2 SP1, thank you.
Complete the Import New Driver Wizard.Step 4 - Assign the driver packages to your task sequenceAfter creating the package(s), the task sequence needs to be configured to use them. In this example I will add the HP EliteBook 8560w package to a task sequence named Windows 7 Enterprise SP1 x64. Using the ConfigMgr Console, select Task Sequences, right-click Windows 7 Enterprise SP1 x64 task sequence and select Edit. In the Post Install group, disable the Auto Apply Drivers action. (Disabling is done by selecting the action and, in the Options tab, select the Disable this step check box.). After the disabled Post Install / Auto Apply Drivers action, add a new group name Drivers. After the Post Install / Drivers group, add a new group named HP.
Solution:After creating the source directory using the deployment process, you create the SCCM software installation package. An SCCM package contains the files and instructions that SCCM uses to distribute the software and advertise the package to users. The deployment process creates the files and instructions, but SCCM must be configured to use these files.To create a software installation package using SCCM. Click Start menu Programs, or All Programs Microsoft System Center Configuration Manager 2007 ConfigMgr Console. In the Configuration Manager Console window, expand Software Distribution. Right-click Packages Distribute Software. In the Distribute Software wizard, click Next.
Working plain clothes assignments until both agencies adopted.40 caliber semi-automatic pistols.Styles The Model 19 was produced in blued or nickel-plated steel with wood or rubber combat grips, an adjustable rear sight, full-target or semi-target hammer, serrated wide target trigger or combat-type, and was available in 2.5' (3': Model 66—rare), 4', or 6-inch barrel lengths. The 2.5- and 3-inch barrel versions had round butts, while the others had square butts. The weights are 30.5 ounces, 36 ounces, and 39 ounces, respectively. Smith and wesson model 59 serial numbers. 2.5' Model 19-5 of the US Diplomatic Security Service, featuring unusual matte black finish.The Model 19 was produced from 1957 (first model number stampings) to November 1999. As well as Patrol Agents of the U.S.
![]()
In the Package dialog box, select Create a New Package and Program without a Definition File. Click Next. In the Package Identification dialog box, enter the information for Name, Version, Publisher, Language and any comments. Click Next. In the Source Files dialog box, make selections for where SCCM retrieves the files and how it manages them. Select “Always Obtain Files from a Source Directory”.
Click Next. In the Source Directory dialog box, specify the location of the source directory. Click Next. In the Distribution Points dialog box, select the distribution point(s).
This is the location from which the software package will be deployed to the target computers. Click Next.
In the Program Identification dialog box, enter the name of your program. This is the name that displays in Add or Remove Programs in the Control Panel. In the Command Line field, enter AdminImagesetup.exe /W /Q /I AdminImage.ini /Lang en-US. For example, if your deployment is named 'Adsk-2012', you would enter AdminImagesetup.exe /W /Q /I AdminImageAdsk-2012.ini /Lang en-US. Note: This example assumes the language pack you wish to install is US English.
Create New Driver Package Sccm 2012
/W is the flag for SMS and SCCM, /Q is the silent install, /I indicates this is a deployment installation. In the Program Properties dialog box, Program Can Run drop-down list, select how you want your program to install. Your choices are. Only When a User is Logged On.
Whether or Not a User is Logged On. Only When No User is Logged On. In the After Running drop-down list, select an action to take after the program has been installed.
Your choices are. No Action Required. Program Restarts Computer. ConfigMgr Restarts Computer. ConfigMgr Logs User Off. NoteSome products require a system restart after installation.Click Next.
In the Advertise Program dialog box, select Yes to advertise the program to users. Click Next. In the Select a Program to Advertise dialog box, select the package you want to advertise. Click Next. In the Select Program Advertisement Target dialog box, select the collection of people to whom you want to advertise, or create a new collection. In the Select Program Advertisement Name dialog box, enter or change the name of your advertisement.
Add any comments to further describe the advertisement. Click Next. In the Select Program Advertisement Subcollection dialog box, select one of the following options:. Advertise this Program to an Existing Collection.
Create a New Collection and Advertise this Program to It. Click Next. In the Select Program Advertisement Schedule dialog box, if desired, set options to advertise your program at a specific date and time, or set an expiration date. Click Next. In the Select Program Assign Program dialog box, select one of the following options:. If the installation process is mandatory, select Yes, Assign the Program. If the installation process is optional, select No, Do Not Assign the Program.Click Next.
In the Summary dialog box, verify your advertisement information. Use the back buttons to make any changes. To finish, click Next.
Comments are closed.
|
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |